When refurbishing a used saddle, first clean with BEE NATURAL LEATHERCARE'S SADDLE SOAP, allow to dry about 24 hours out of sunlight and heat, and then apply a light coating of #1 SADDLE OIL or #1 SADDLE OIL with FUNGICIDES. Wait approximately 30 minutes and apply a second coat. Then apply a coating of LEATHER FINISH. This combination makes leather look it's best. 

#1 SADDLE OIL with NATURAL FUNGICIDES kills the bacterium that causes Distemper. The oils used in this product help sanitize the leather. The leather should be deep cleaned with a product like SADDLE SOAP. This allows #1 SADDLE OIL with NATURAL FUNGICIDES to get down into the leather and kill any of the Streptococcus equi that are present. 

All new saddles should be treated under the saddle jockey and fenders to make sure the interior fibers have proper protection. 

During cutting or carving with PRO-CARV, as the surface of the leather dries, there will be more drag on the knife. It is recommended that the surface be given a sponging of solution at that time to restore easy and smooth carving. In addition, occasionally dipping the blade in the solution greatly enhances the knife's performance. 

Automobile Leather Interiors can be subjected to extreme temperature variations and a variety of soiling conditions. This means that extra care needs to be taken in cleaning and maintaining the leather. Our AUTO AMORE is ideal for cleaning and removing marks and soiling that comes from normal use. It is easy to apply and color safe. It will remove a variety of marks including ink. Sometimes the ink takes time to loosen and lift so AUTO AMORE needs to be applied a couple of times to let the cleaners work. To maintain and soften the leather our DISTRESSED LEATHER Conditioner used twice a year will penetrate deep into the leather, lubricating and softening the fibers. This will add years of life to the leather. Apply on a warm day when the leather will readily absorb the life support oils found in DISTRESSED LEATHER. After allowing the conditioner to penetrate for a few hours take a clean cloth and wipe off any oils that remain on the surface. If you applied too much you may feel a sticky touch to the surface. If this happens wipe the surface with a damp cloth. 

Bikers use LEATHER AMORE on their bike leathers and leather garments to clean and condition. Other products used to waterproof is Conditioner for DISTRESSED LEATHER, MINK OIL, and SNOW COUNTRY WAX OIL.